Model ERS400NS scaler is stainless steel inside and out for the harshest environments when tool longevity, durability and easy clean-up are a necessity.  Equipped with 1/8" x 7" Stainless Steel Needles
and side handle.

Tool specifics: 4,000 bpm at 90 psi, 8 cfm, 1 1/16” stroke, 15/16” diam. piston, 3/8” air inlet. Made in the U.S.A. with a two year warranty.

Model SW182NS for scaling and surface preparation.  Built with a carbon steel throttle body and scaler body.  Equipped with 19 ea. 1/8" x 7" Carbon Steel needles and side handle.

Railroad Model SW182NS4 for more aggressive surface preparation.  This tool is equipped with 14 ea. 4 mm (.1575 diam.) x 7" long carbon steel needles and side handle.

Tool specifics: 4,000 bpm at 90 psi, 8 cfm, 1 1/16” stroke, 15/16” diam. piston,
1/4” air inlet.  Made in the U.S. A. with a one year warranty.

Model SW182NSP is designed with a 360 degree, ergonomic,
vibration-reducing throttle handle.  Our handle reduces
vibration by 40%!!  This model easily converts to a chisel scaler by
removing needle attachment and installing chisel accessories.

Tool Specifics: 4,000 bpm at 90 psi, cfm 8, 1 1/16” stroke,
15/16” diam. piston, 1/4” air inlet. 
Made in the U.S. A. with a one year warranty

Model SW182NSG is for scaling and surface preparation. 
Use for removing weld slag, paint, coke, tar rust, epoxy and more. 
The gooseneck handle is designed with a thumb operated trigger
to give the operator additional comfort and control while still
maintaining a firm grip. 

Converts into a Chisel Scaler by removing the
needle attachment and installing a 1/2" square shank chisel.
Includes side handle and needle attachment with 19 pc. set
of 7" x 1/8" needles. 


Tool Specifics: 4,000 bpm at 90 psi, 8 cfm, 1 1/16" stroke,
15/16" diam. piston, 1/4" air inlet.  Made in the U.S.A. with a one year warranty.
 
 

Model MCHNS4 for extra heavy-duty use, when you need to
cover more area faster than standard scaling tools.  
Comes equipped with a 30 pc. set of
extra large, 4 mm (.1575 diam.) x 7" scaling needles
and a side handle for better control.

MCHNS is equipped with a 37 pc. set of 1/8" x 7" long Carbon
Steel needlesfor standard duty scaling.  Stainless Steel 1/8" and
Beryllium Copper 1/8" diam. needles are available for us with this model.

Both models have a 360 degree rotating exhaust and 360 degree removeable
needle attachment and side handle and is easily converted into a Chipping Hammer
with the use of Chisel Retainer, Part #: SW1190 and Coil Spring, Part #: SW1194M.

Tool specifics: 3,000 bpm at 90 psi, cfm 25, 2” stroke, 7/8” diam. piston,
1/4” air inlet. Made in the U.S.A. with a one year warranty.