Model ERS400NS scaler is stainless steel inside and out for the harshest environments when tool longevity, durability and easy clean-up are a necessity.  Equipped with 1/8″ x 7″ Stainless Steel Needles
and side handle.

Tool specifics: 4,000 bpm at 90 psi, 8 cfm, 1 1/16” stroke, 15/16” diam. piston, 3/8” air inlet. Made in the U.S.A. with a one year warranty.

Model SW182NS for scaling and surface preparation.  Built with a carbon steel throttle body and scaler body.  Equipped with 19 ea. 1/8″ x 7″ Carbon Steel needles and side handle.

Railroad Model SW182NS4 for more aggressive surface preparation.  This tool is equipped with 14 ea. 4 mm (.1575 diam.) x 7″ long carbon steel needles and side handle.

Tool specifics: 4,000 bpm at 90 psi, 8 cfm, 1 1/16” stroke, 15/16” diam. piston,
1/4” air inlet.  Made in the U.S. A. with a one year warranty.

Model SW182NSP is designed with a 360 degree, ergonomic, vibration-reducing throttle handle.  Our handle reduces vibration by 40%!!   This model easily converts to a chisel scaler by removing needle attachment and installing chisel accessories.

Tool Specifics: 4,000 bpm at 90 psi, cfm 8, 1 1/16” stroke,
15/16” diam. piston, 1/4” air inlet. 
Made in the U.S. A. with a one year warranty

Model SW182NSG is for scaling and surface preparation.  Use for removing weld slag, paint, coke, tar rust, epoxy and more.   The gooseneck handle is designed with a thumb operated trigger to give the operator additional comfort and control while still maintaining a firm grip. 

Converts into a Chisel Scaler by removing the needle attachment and installing a 1/2″ square shank chisel.  Includes side handle and needle attachment with 19 pc. set of 7″ x 1/8″ needles. 


Tool Specifics: 4,000 bpm at 90 psi, 8 cfm, 1 1/16″ stroke,
15/16″ diam. piston, 1/4″ air inlet.  Made in the U.S.A. with a one year warranty.

Model MCHNS4 for extra heavy-duty use, when you need to cover more area faster than standard scaling tools.  Comes equipped with a 30 pc. set of
extra large, 4 mm (.1575 diam.) x 7″ scaling needles and a side handle for better control. 

MCHNS is equipped with a 37 pc. set of 1/8″ x 7″ long Carbon
Steel needles for standard duty scaling.  Stainless Steel 1/8″ and
Beryllium Copper 1/8″ diam. needles are available for us with this model.

Both models have a 360 degree rotating exhaust and 360 degree removable
needle attachment and side handle.  Both models can easily be converted into a
Chipping Hammer with the additional purchase of Chisel Retainer, Part #: SW1190M
and Coil Spring, Part #: SW1194M, both sold separately.

Tool specifics: 3,000 bpm at 90 psi, cfm 25, 2” stroke, 7/8” diam. piston,
1/4” air inlet. Made in the U.S.A. with a one year warranty.

To view our YouTube Video click here