Fits the MCH Mini & MCH Long Reach Chippers as
well as the Extreme Duty, 4 Bolt, Air Chipping Hammers.
(Oval Collar, .6801 Round Shank Style)
Fits the MCH Mini & MCH Long Reach Chippers as
well as the Extreme Duty, 4 Bolt, Air Chipping Hammers.
(Oval Collar, .6801 Round Shank Style)
For Non-sparking Applications.
Fits the MCH Mini & MCH Long Reach Chippers as
well as the Extreme Duty, 4 Bolt, Air Chipping Hammers.
(Oval Collar, .6801 Round Shank Style)
Fits the MCH Mini & MCH Long Reach Chippers as
well as the Extreme Duty, 4 Bolt, Air Chipping Hammers.
(Oval Collar, .6801 Round Shank Style)
Fits the MCH Mini & MCH Long Reach Chippers as
well as the Extreme Duty, 4 Bolt, Air Chipping Hammers.
(Oval Collar, .6801 Round Shank Style)
Use for removing high spots, roughing and exposing aggregate in concrete to allow grout to adhere. Can also be used to rough concrete to create a non-slip surface or on stone for a decorative appearance.
Fits all ERS182 Model Long Reach Scalers as well as the
SW182CSP, SW182CSG, ERS400CS & SW182CS.
(1/2″ Notched, Square Shank Style)
Fits all ERS182 Model Long Reach Scalers as well as the
SW182CSP, SW182CSG, ERS400CS & SW182CS.
(1/2″ Notched, Square Shank Style)
Fits all ERS182 Model Long Reach Scalers as well as the
SW182CSP, SW182CSG, ERS400CS & SW182CS.
(1/2″ Notched, Square Shank Style)
Fits all ERS182 Model Long Reach Scalers as well as the
SW182CSP, SW182CSG, ERS400CS & SW182CS.
(1/2″ Notched, Square Shank Style)
For Non-spark Applications.
Fits all ERS182 Model Long Reach Scalers as well as the
SW182CSP, SW182CSG, ERS400CS & SW182CS.
(1/2″ Notched, Square Shank Style)
Fits all ERS182 Model Long Reach Scalers as well as the
SW182CSP, SW182CSG, ERS400CS & SW182CS.
(1/2″ Notched, Square Shank Style
Fits all ERS182 Model Long Reach Scalers as well as the
SW182CSP, SW182CSG, ERS400CS & SW182CS.
(1/2″ Notched, Square Shank Style)
Fits the MCH Mini & MCH Long Reach Chippers as
well as the Extreme Duty, 4 Bolt, Air Chipping Hammers.
(Oval Collar, .6801 Round Shank Style)
For use with Flex Blades FB120, FB800 and FB400
Fits all Long Reach Scaler Models ERS32-182 to ERS72-182
ERS32-400 to ERS72-400, as well as
Chisel Scaler Models ERS400CS, SW182CS, SW182CSP
Gooseneck Chisel Scaler Model SW182CSG.
For use with Flex Blades FB120, FB800 and FB400.
(1/2″ Notched, Square Shank Style)
Sharp edged for removing glues, epoxy, resins, tar, tile, carpet and more.
For use with Blade Holder Chisel CFBH4680H
and Blade Chisel Holder BHC-73 sold separately.
Sharp edged for removing glues, epoxy, resins, tar, tile, carpet and more.
For use with Blade Holder Chisel CFBH4680H
and Blade Chisel Holder BHC-73 sold separately.
Sharp edged for removing glues, epoxy, resins, tar, tile, carpet and more.
For use with Blade Holder Chisel CFBH4680H
and Blade Chisel Holder BHC-73 sold separately.
For use with Oval Collar Chisels in the following models:
Extreme Duty Needle Scaler, Models MCHNS4 and MCHNS.
Extreme Duty Extended Reach Chipper, Models ERS6801-48 and ERS 6801-60.
Extreme Duty 4 Bolt Chipper, Models SWCHB2R & H, SWCHB3R & H.
Requires Retainer Coil Spring part number SW1194 shown below.
MCH Mini Chipper Chisel Retainer for use with Oval Collar Chisels.
Use with Retainer Coil 
Spring part number 1194M shown below.
For use with Round Collar Chisels in the following models:
Extreme Duty Extended Reach Chipper, Models ERS6801-48 and ERS6801-60.
Extreme Duty 4 Bolt Chipper, Models SWCHB2R & H and SWCHB3R & H.
Use Retainer Coil Spring, part number 1194 shown below.
For use with Round Collar Chisels and Flex Blade Holder Chisel on
the following models:
Extreme Duty Extended Reach Chipper, Models ERS6801-48 and ERS6801-60.
Extreme Duty 4 Bolt Chipper, Models SWCHB2R & H and SWCHB3R & H.
Uses Retainer Coil Spring, part number 1194 shown below.
Retainer Coil Spring 1194 fits Retainer models SW1190, SW1291R and SW1195R shown above and all Extreme Duty Air Chipper Models.
Retainer Coil Spring 1194M fits the MCH Heavy Duty Mini Chipping Hammer
For Non-spark Applications
Fits All ERS182, ERS400 and SW182 Needle Attachments
Needle Set, 19 pc., 1/8″ (3 mm) diam., flat tip
Fits Needle Attachments for Models ERS182, ERS400 and SW182
For Non-spark Applications
Needle Set, 19pc., 1/8″ (3 mm) diam., flat tip
Fits Needle Attachments for Models ERS182, SW182, MCH and 6801.
1/8″ (3 mm) diam., 19 Piece Set
Also Available:
Flat Needles, N714-4F, 4 mm x 7″, 14 pc. set, flat tip
Flat Needles, N730-4F, 30 pc. set, flat tip
Point Needles, N714-4C, 14 pc. set, chisel tip
Point Needles, N730-4C, 30 pc. set, chisel tip
*please call for pricing.